Who are we? Polypipe Building Products are focused on delivering solutions to the residential sector. Polypipe Building Products works with national and local developers, plumbing and heating engineers, general builders and groundworkers to deliver above and below ground drainage systems, rainwater solutions as well as hot and cold plastic plumbing products. About the role: You will be responsible for maximising the productivity of the department by ensuring that all tooling is maintained and repaired to the highest standards, both mechanically and electrically. Your day to day: Carrying out tool checks in accordance with the plan making sure the tool is on the correct inserts, date stamps and to a good production standard such as cavity finish and any other issues from it being stored. Covering press breakdowns highlighted on Mattec to minimise machine downtime. This could be breakdowns such as stuck, fittings, cavity and core polishing, seized ejection or other parts basically repairing or replacing such as an angle pin or wear plate, getting the tool to a runnable state making quality approved parts. Insert changes some are done prior to tool going in and some swapped in the press. This can consist of removing cores, shells and inserts to create for example a socket /spigot part. Tool servicing full strip down and rebuild checking the tool for worn parts. Replacing or repairing what is required and checking the last off sample that may highlight any defects. ..... full job details .....